For home studio builders
Teleprompter glass: how the beam splitter rig works
A teleprompter glass setup lets you read a script without looking away from the camera. The glass carries a thin reflective coating, so part of the light from the screen behind it is reflected towards your eyes and part passes through to the camera. A laptop behind the glass shows the script, the camera films through the glass, and you read the words in the same place as the lens. This guide covers the glass, the angle, the distance between screen and glass, and what a phone cannot do here. It matters if you are building a home studio, because the mirror setting in a browser prompter decides whether the text is readable through the panel.
What a beam splitter does inside the rig
A teleprompter glass panel is a sheet of glass with a thin reflective coating on one side. Light from the screen behind it hits that coating at an angle, part of the light is reflected towards your eyes and part carries on through the glass. The camera therefore films your face and never sees the screen, while you see the script floating in front of the lens.
Because the text reaches your eye as a reflection, the image arrives flipped. The words on the screen are normal, the words in the glass are mirrored. Which axis is mirrored depends on the angle of the mount, which is why the mirror setting is the first thing to check.
- The camera looks through the glass and sees you, not the screen.
- You look into the glass and see the screen, but flipped.
- The glass only reflects the light coming from the screen behind it.
- Any screen can work, but it has to be bright enough to light the text through the coating.
Beam splitter glass is usually sold already angled for 45 degrees. If your panel is flat, check the angle of the frame you put it in before you buy anything else.
How to set up teleprompter glass in a home studio
-
Put the screen behind the glassThe screen faces the glass and the camera sits on the other side, at 90 degrees to the screen. The glass goes between the two at 45 degrees. On a laptop, the screen is the back of the lid, so the laptop rests on a stand with the glass leaning in front of it.
-
Leave 20 to 30 centimetres between themThat gap is enough for the reflected text to fill the glass without spilling over the edges. Closer and the letters grow too large, further away and the text dims because less light reaches the coating.
-
Turn on the mirror and look throughOpen the prompter on the screen behind the glass and switch on the horizontal mirror. If the words come out upside down, switch on the vertical mirror as well. The M and V keys do it while the prompter is open, and the two buttons in the bottom bar do the same from the mouse.
-
Darken everything around the glassChoose the black screen and cover the back of the display with a black cloth. Light that leaks around the edges of the screen reaches the camera and shows up as a glow on the glass.
Which mirror to use, and when
There are two independent mirror switches in the prompter and they are not the same thing. The horizontal mirror flips the text left to right. The vertical mirror flips it top to bottom. Most home rigs need the horizontal one, and need the vertical one as well when the text reads upside down through the glass.
- Mirror horizontally, the M key: flips the text left to right. This is the usual setting for glass tilted at 45 degrees.
- Mirror vertically, the V key: flips the text top to bottom. Add it when the words read upside down.
- Both mirrors on: for a mount that is rotated or a panel at a different angle.
- No mirror: normal reading, for a laptop placed under the camera with no glass at all.
Test the mirror before you write anything. Put a few words on the screen, look through the glass and check that the letters are the right way round and the right way up.
How far the screen should sit from the glass
The distance between the screen and the glass decides how big the text looks and how bright it looks. Keep it at 20 to 30 centimetres and the reflection reads comfortably at a normal reading distance of about 50 centimetres from the glass. Put the screen flat on the table with the glass leaning over it and the text arrives stretched and dim.
The font size in the prompter runs from 24 to 120 pixels and the speed runs from 60 to 300 words per minute. On a rig, keep the speed near 140 words per minute and set the size by eye through the glass rather than on the screen. If the letters fill the whole panel, the words are too big and your eye has to travel further on every line.
The reading guide helps here more than it does on a laptop. Put the guide band where the lens is, so your gaze comes back to the same line every time instead of hunting for the text in the reflection.
Why the back of the screen needs a black cloth
The screen behind the glass is the brightest object in the room, and it is pointed at the camera. Without a cover, the edges of the display light up the glass and the camera records a rectangle of glare where the script should be clean.
- A black cloth over the back of the display absorbs the light that would otherwise bounce off the wall.
- The black OLED screen in the prompter helps: it is nearly black in the areas with no text.
- Keep the cloth loose enough to let the screen breathe, and away from the vents of a laptop.
- Darken the room as well. A dark room needs less brightness on the screen and gives a cleaner reflection.
Why a laptop works and a phone does not
A phone cannot run this rig well. The glass needs a large, bright screen right behind it, and a phone screen is under 20 centimetres wide, so the reflected text is small and it does not light the coating enough. A phone also has no lid to hide behind, so there is nowhere to put the black cloth.
A laptop or a monitor does. The screen is big, it is bright enough, and the lid gives you a flat black surface to cover. A tablet sits in between: it works if you can mount it at the right angle and if you record in a room with controlled light, but it is more fiddly than a laptop.
A phone is still useful in the same setup as a remote control: it can change the speed and jump between paragraphs while the laptop holds the text behind the glass.
References and tools
These are the places where the background on the optics lives, if you want to know more about how the glass works.
Frequently asked questions
What is teleprompter glass?
How do I know if I need the horizontal or the vertical mirror?
What angle should the glass be at?
Can I use a tablet with beam splitter glass instead of a laptop?
Does this free teleprompter work with teleprompter glass?
Set up your teleprompter glass rig with a free browser prompter
Open the teleprompter, turn on the mirror your rig needs and check the text through the glass before you record. It runs in the browser, nothing is installed and the script never leaves your device.
Open the teleprompter