For actors
Teleprompter for auditions
A teleprompter for auditions lets an actor film a self tape without memorising the whole scene first. The lines scroll at the pace you speak them, so you can read a part, act it and go back to the same place for another take. It is used for the cold reading, for the rehearsal of a scene you will perform later, and for the audition you have to send before the casting deadline. This guide covers how to read a scene while keeping the direction of the other character in mind, and what the tool does and does not do for you.
Why a teleprompter for auditions is normal practice
A self tape is a performance, not a reading test, and casting directors know the difference between an actor who can act and an actor who can recite. The problem is that a scene of two pages has to be filmed in one or two takes, and memorising it first takes hours of work you may not have. Reading from a prompter removes the memorising from the equation and leaves the acting in it.
It also removes the second problem. When you read from paper, your eyes drop and the camera sees you looking down, and when you watch yourself back you lose your place and start again. The prompter keeps the text in the same place every time, at the height of your eyes, so the camera only sees you acting.
- You can film a cold read in one take, with no rehearsal of the words.
- You can rehearse a scene you will perform on stage later, with the same timing.
- You can retake one speech instead of the whole scene.
- You can check the direction of the other character in the text itself.
- You can keep an unreleased part on your own device, with no account and no upload.
Read a scene without losing the other character
The scene text is not only words, it is also instructions about where the character is looking. A line that ends with a question is a line about the other person, and a line that says to the window is a line away from them. If you read the text flat, in a voice that never changes direction, the scene loses most of what makes it work.
- Read the stage directions first, then the speeches, so you know where the character stands.
- Mark the name of the other character in your copy, so you know which speech you are answering.
- Keep the direction of each speech: a question goes to the person, an aside goes away from them.
- Give the other character something to react to, even when you are alone in the frame.
- Keep the pauses written in the text, with a line break or a short marker between speeches.
A useful way to work is to read the scene twice. The first time, at 100 words per minute, just for the sense of it and the direction of the speeches. The second time, at 140 words per minute, as if the other actor were already in the room. The second pass is the one you film.
One paragraph per speech, so you can find a line fast
The prompter moves between paragraphs with the arrow keys, and it never scrolls backwards on its own. That means the way you split the script decides how easy it is to find a line. Split it by speech and each paragraph is one thing the character says, with the other character implied by the name above it.
-
Split the script into speechesOne paragraph for each speech of the character you are playing. Keep the other character in the same paragraph as a name in capitals, for example MARGARET, followed by the line in brackets.
-
Keep the stage directions in their own paragraphDirections like she looks away or a pause are written in brackets, so you can skip them with the arrow key without reading them out loud.
-
Number the paragraphs if the scene is longFor a scene of 3 pages or more, add a number at the start of each paragraph. It gives you a reference for the director when you ask about a note.
-
Save the script before you filmThe editor keeps up to 10 scripts in the browser of your device. Give this one the name of the project, so the audition for the second part of the season is already there.
The countdown can be 0, 3, 5 or 10 seconds, which is useful when the camera needs a couple of seconds to settle before you start.
Several takes of the same scene
Most actors film a self tape in more takes than they expect, because the first one is always about the mechanics: where the camera is, how close the text is, how fast you are reading. Once those are settled, the takes get better because you are acting instead of operating the setup.
- Take one: read the whole scene without stopping, to find the speed that fits the text.
- Take two: read it again with the intention, which is the one you keep.
- Take three: film only the speech that felt weak, and use it to replace the first take.
- Keep the same framing and the same distance for every take, so the cut is invisible.
- Read the whole scene again afterwards, out loud, to check that the intention stayed the same.
Between takes, do not rewrite the scene. If you change the wording, you are not comparing performances any more, you are comparing different scripts. Change the intention instead, and read the same words again.
What the teleprompter does not do for an audition
It is worth being clear about this, because a lot of free tools promise more than they do. This one is a prompter and nothing else. It shows the text, it scrolls the text and it keeps the text on your device. It does not record the camera and it does not export video, so the recording still happens in your camera app or your recording software, next to a second window.
- It does not record your image or your voice, and it does not export a video file.
- It does not follow the voice or detect when you are speaking, the speed is the one you set.
- It does not judge the performance, no notes, no scores, no analysis.
- It does not have accounts, cloud storage, sync, a watermark or a limit on the number of takes.
- It does not write the script for you, the text is the one you paste into the editor.
What you get is the part that is hard to do alone: the words in front of you, in order, at your pace, while you act them.
The keyboard shortcuts and the remote
These work while the prompter is open, so you can change the speed or jump to the next speech without stopping the camera. Press the question mark in the editor to see the same list on screen.
| Key | What it does |
|---|---|
| Space | Start or pause the scrolling |
| Arrow up | Increase the speed by 5 words per minute |
| Arrow down | Decrease the speed by 5 words per minute |
| Arrow right | Jump to the next paragraph |
| Arrow left | Jump to the previous paragraph |
| R | Restart the script from the beginning |
| + | Increase the font size by 2 pixels |
| - | Decrease the font size by 2 pixels |
| M | Mirror the text horizontally |
| F | Switch to full screen |
| Esc | Close the teleprompter |
| Ctrl + Enter | Open the teleprompter from the editor |
| ? | Show the list of shortcuts |
A Bluetooth presentation remote also works: the play button starts and pauses, and the direction pad changes the speed and jumps between speeches.
References and tools
These are the official documents on the recording side, if you need to check how to capture a window or a camera.
Frequently asked questions
Is it acceptable to read a scene from a teleprompter for a self tape?
How fast should I read a scene in an audition?
Can I use a teleprompter for an audition without recording software?
Will the teleprompter judge my performance or tell me how I did?
Open the teleprompter for your next self tape
Open the teleprompter, paste the scene and set the speed in words per minute. The lines scroll at your pace while you act, the script stays on your device and there is nothing to install.
Open the teleprompter