Fullscreen Teleprompter

For beginners

How to use a teleprompter

A teleprompter scrolls your script at the speed you speak, so you can read it while you look straight into the camera. Learning how to use a teleprompter takes five minutes and no equipment: open the tool in your browser, paste the text, choose a reading speed, put the words under the lens and press play. This guide walks through those steps one by one, then shows the shortcuts that change the speed, the font size and the reading guide while you are recording. Nothing is installed and no account is needed, and the whole thing keeps working with no connection once the page has loaded.

What a teleprompter does for you

A teleprompter is a screen that shows your script and scrolls it at a fixed speed. You read it out loud while the text moves, and the speed decides how fast you have to talk. If the text runs away from you, you slow it down. If you are waiting for it, you speed it up.

That is all it does. It does not record, it does not follow your voice and it does not write anything for you. You still need a camera, a script worth reading and a clear idea of what you want to say. What the prompter gives you is the delivery: the words arrive in order, at your pace, without you losing your place.

  • You keep your eyes on the lens instead of on a piece of paper.
  • You can retake one paragraph without starting the whole recording again.
  • The script is kept in your own browser, so nothing is uploaded and there is no account.
  • It works with no connection, which means it also works in a room with no wifi.

How to use a teleprompter in five steps

  1. Write the script in short paragraphs
    One idea per paragraph, two or three sentences long. You can jump between paragraphs with the arrow keys, so each paragraph has to make sense on its own.
  2. Paste it into the editor
    Paste the text in the editor window. The word count and an estimate of the reading time appear next to it, so you know the length of the take before you record.
  3. Set the reading speed
    Start at 140 words per minute, which is a normal pace for a recorded video. Read the first paragraph out loud at your own speed and adjust by 10 words per minute until you are not racing it.
  4. Put the text under the camera
    On a laptop, the prompter goes in the bottom half of the screen, under the built-in webcam. On a separate monitor, put that monitor below the camera rather than next to it.
  5. Press play and check the first ten seconds
    Record ten seconds and watch it back with an eye on your gaze. If your eyes move sideways, narrow the column. If they move down, move the prompter closer to the lens.

The prompter is a normal browser window, so your recording software keeps working exactly as before. Press F to open it full screen and Esc to close it.

Set the reading speed before you record

The speed setting is the one that decides whether a take sounds calm or rushed. It runs from 60 to 300 words per minute. Most people talk between 120 and 160 words per minute in a recorded video, so start in the middle of that range and adjust from there.

  • 110 to 130 words per minute: tutorials, courses and anything with numbers to read.
  • 140 words per minute: the normal pace of a talking head video.
  • 160 to 180 words per minute: short, energetic videos and opinion pieces.
  • Above 190 words per minute: fast enough that you start dropping words.

You can change the speed while the text is moving, with the arrow keys. A definition read slowly and a list read fast sounds much more natural than one constant pace for the whole script.

Put the text where the camera is

Two things decide whether a viewer notices you are reading: how far the text is from the lens and how wide the column is. If the words sit far to the side, your eyes travel and the movement is visible in the recording. That is the same effect as an old typewriter, and viewers read it as nervousness.

So put the prompter directly under the camera and narrow the column of text until the line is about half the width of the screen. The margins go from 2% to 35% on each side, which means the column can go from very wide to very narrow.

  • Laptop: the bottom half of the screen, under the built-in webcam.
  • Desktop with two monitors: one below the camera, one for your editing software.
  • Phone on a stand: directly under the camera, with the text as large as you can read at that distance.
  • Never to the side. A prompter off to the side pulls the eyes out of frame every time.

Column width and the reading guide

The reading guide is a band, a pair of small arrows or a thin line that marks the height you read at. It comes in four styles and you can switch between them with the button in the bottom bar. With a guide in place, your gaze comes back to the same line every time instead of drifting down the screen.

Then move the guide to the height of the lens. If the camera is at the top of the screen, the guide belongs in the upper third, not in the middle. When the text sits exactly where the camera is, the eye movement becomes invisible.

  • The font size runs from 24 to 120 pixels, and the default is 48 pixels.
  • Bigger letters at the same pace always look better than small letters at full speed.
  • The line spacing goes from 1.2 to 2, so you can open up the text when the font is large.
  • There are eight typefaces for the script, from a plain sans serif to a serif that reads like a newspaper.

The keyboard shortcuts

Everything below works while the teleprompter is open, so you do not have to stop the recording to change anything. Press the question mark in the editor to see the same list on screen.

Key What it does
Space Start or pause the scrolling
Arrow up Increase the speed by 5 words per minute
Arrow down Decrease the speed by 5 words per minute
Arrow right Jump to the next paragraph
Arrow left Jump to the previous paragraph
R Restart the script from the beginning
M Mirror the text horizontally
V Mirror the text vertically
+ Increase the font size by 2 pixels
- Decrease the font size by 2 pixels
F Switch to full screen
Esc Close the teleprompter
Ctrl + Enter Open the teleprompter from the editor
? Show the list of shortcuts

A Bluetooth presentation remote does the same job: the play button starts and pauses, the direction pad changes the speed and jumps between paragraphs.

Save the script and take it with you

The editor keeps up to 10 scripts in the browser of your device, each with a name, a word count and the date it was last changed. You can load one, update it after an edit and export it to a .txt or .md file to send to a colleague or to keep in your own archive.

  • Give the script a name before you save it, so you can find it later.
  • Export before a long shoot, in case you clear the browser data on the device.
  • The countdown can be 0, 3, 5 or 10 seconds. Use it to give yourself a moment before the first word.
  • There are four screen backgrounds: black, the yellow of old television sets, soft grey and paper.

Frequently asked questions

How do I use a teleprompter for the first time?
Paste your script into the editor, set the reading speed to 140 words per minute, press start and read. Put the prompter window under your camera before you begin, and record ten seconds to check that your eyes stay on the lens. That is the whole process.
What reading speed should I use?
Most people speak between 120 and 160 words per minute on camera, so start at 140. Read the first paragraph out loud at your normal pace. If you have to drag the words, lower the speed by 10 words per minute and read it again.
Do I need to install anything to use a teleprompter?
No. This one is a browser teleprompter. You open the page in your browser, paste the script and press start. There is no account, nothing to install and nothing uploaded: the script stays in the local storage of your own device, and it keeps working with no connection.
Can I use a teleprompter with my normal camera app?
Yes, because the prompter is just another window on your computer. Your camera app keeps recording as before. If your software captures the whole screen, capture only the windows you want to show and keep the prompter on a second screen or on a phone.

Open the teleprompter and read your first script

How to use a teleprompter in practice: open the tool, paste the script, set the speed in words per minute and press start. The text scrolls at your pace, the script stays on your device and there is nothing to install.

Open the teleprompter

Support this project

If you'd like to support the project, take a look at these beautiful illustrated products. I'm also a fantasy illustrator, and you can support me by buying prints. I'm sure you'll find something special for you, for a friend or for family.